中国DOS联盟

-- 联合DOS 推动DOS 发展DOS --

联盟域名：www.cn-dos.net  论坛域名：www.cn-dos.net/forum
DOS，代表着自由开放与发展，我们努力起来，学习FreeDOS和Linux的自由开放与GNU精神，共同创造和发展美好的自由与GNU GPL世界吧！

作者: 标题: 麻烦高人注解一下批处理代码意思。 上一主题 | 下一主题 haolongo 初级用户 积分 24 发帖 17 注册 2008-8-22 状态 离线 『楼 主』:  麻烦高人注解一下批处理代码意思。 GHOST镜像文件有密码，如何破解？ 我的东芝笔记本带有一张恢复盘，是GHOST做的，但是影象文件有密码，而恢复的时候却不需要任何密码…… 怎么能破解出这个密码？？ 光盘自动启动，自动恢复的，我把几个批处理文件内容放上，请帮忙看看： 软盘镜像文件内 autoexec.bat的内容： @ECHO OFF PATH=A:\TOOLS;A:\DOS REM manufacture check "TOSHIBA" TOSCHK > NUL IF ERRORLEVEL 1 OFF REM set temporary drive SET TEMP=I: VOLCHECK I: MS-RAMDRIVE > NUL IF NOT ERRORLEVEL 1 GOTO DV SET TEMP=H: VOLCHECK H MS-RAMDRIVE > NUL IF NOT ERRORLEVEL 1 GOTO DV SET TEMP=G: VOLCHECK G: MS-RAMDRIVE > NUL IF NOT ERRORLEVEL 1 GOTO DV SET TEMP=F: VOLCHECK F: MS-RAMDRIVE > NUL IF NOT ERRORLEVEL 1 GOTO DV SET TEMP=E: VOLCHECK E: MS-RAMDRIVE > NUL IF NOT ERRORLEVEL 1 GOTO DV SET TEMP=D: VOLCHECK D: MS-RAMDRIVE > NUL IF NOT ERRORLEVEL 1 GOTO DV SET TEMP=C: VOLCHECK C: MS-RAMDRIVE > NUL IF NOT ERRORLEVEL 1 GOTO DV GOTO ERROR :DV F2D A:\BMP.IMG %TEMP% > NUL F2D A:\TOOLS.IMG %TEMP% /D > NUL PATH=%TEMP%\TOOLS;%TEMP%\DOS;A:\DOS;A:\TOOLS IF NOT EXIST A:\README.BMP GOTO CD BMPVIEW A:\README.BMP PAUSE > NUL :CD MSCDEX /D:MSCD001 /L:T >NUL IF ERRORLEVEL 1 GOTO NO_CDDRV REM get temporary status MBR /G1 >NUL IF ERRORLEVEL 3 GOTO MENU IF ERRORLEVEL 1 GOTO 2ND :MENU IF NOT EXIST A:\BASE.TXT GOTO NORMAL IF NOT EXIST %TEMP%\BMP\SELECT.BMP GOTO NORMAL REM OS select BMPVIEW %TEMP%\BMP\SELECT.BMP /X=140 /Y=160 REM Clear keybuffer CLK CHOICE /C:12 > NUL IF ERRORLEVEL 2 GOTO BASEOS REM Push '1' button BMPVIEW /XC %TEMP%\BMP\BTN1.BMP /X=198 /Y=221 MBR /S2:00 >NUL GOTO WARNNING :BASEOS REM Push '2' button BMPVIEW /XC %TEMP%\BMP\BTN2.BMP /X=198 /Y=238 MBR /S2:01 >NUL GOTO WARNNING :NORMAL REM no OS select MBR /S2:00 >NUL BMPVIEW %TEMP%\BMP\RECOVERY.BMP /X=140 /Y=160 CLK CHOICE > NUL IF ERRORLEVEL 2 GOTO CDERREND BMPVIEW /XC %TEMP%\BMP\Y2.BMP /X=340 /Y=288 GOTO WARNNING :WARNNING REM warnning SET GOPT=-QUIET BMPVIEW %TEMP%\BMP\MES002.BMP /X=140 /Y=160 CLK CHOICE /C:YNS> NUL IF ERRORLEVEL 3 GOTO STATYES IF ERRORLEVEL 2 GOTO CDERREND GOTO YES :STATYES SET GOPT= :YES REM Push 'Y' button BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288 REM set temporary status (first boot) MBR /S1:01 >NUL :2ND REM check boot devie REM  0:FD 1:CD-ROM CDCKBOOT > NUL REM if errorlevel 1 then set boot priority "FD"=0 (Default) IF ERRORLEVEL 1 SETBOOT 0 >NUL REM Partition check REM  11: HDD has already formatted. (FAT32) REM  10: HDD has not been formatted. (FAT32) REM   7: HDD has already formatted. (FAT16) REM   6: HDD has not been formatted. (FAT16) REM   3: HDD has already formatted. (Invalid FAT) REM   1: HDD has not been formatted. (Invalid FAT) REM   0: No partition exists. MBR /P >NUL IF ERRORLEVEL 11 GOTO FORMAT IF ERRORLEVEL 10 GOTO FORMAT IF ERRORLEVEL  7 GOTO FORMAT IF ERRORLEVEL  6 GOTO FORMAT IF ERRORLEVEL  1 GOTO FORMAT GOTO FDISK :CLEAR REM clear partition BMPVIEW %TEMP%\BMP\CLEAR.BMP CLK CHOICE > NUL IF ERRORLEVEL 2 GOTO CDERREND REM Push 'Y' button BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288 BMPVIEW %TEMP%\BMP\MES002.BMP /X=140 /Y=160 CLK CHOICE > NUL IF ERRORLEVEL 2 GOTO CDERREND REM Push 'Y' button BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288 MBR /! > NUL MBR /C1 > NUL CDCKBOOT > NUL IF ERRORLEVEL 1 SETBOOT 4 >NUL HARDBOOT :FDISK REM create FAT32 partition (Max64GB) CLS ECHO. ECHO Create FAT32 partition ... FDISK 1 /PRI:65535 IF ERRORLEVEL 1 GOTO FDISKERR REM check boot devie REM  0:FD 1:CD-ROM CDCKBOOT > NUL REM if errorlevel 1 then set boot priority "CD-ROM"=4 IF ERRORLEVEL 1 SETBOOT 4 >NUL REM reboot HARDBOOT :FORMAT CLS REM --- FORMAT C: %FMTOPT% /U /V:"" /AUTOTEST REM Clear temporary status MBR /C1 >NUL GOTO GO :NO_CDDRV REM CD-ROM Drive not found BMPVIEW %TEMP%\BMP\NO_CDDRV.BMP PAUSE > NUL GOTO END :FDISKERR ECHO FDISK ERROR! PAUSE > NUL GOTO END :CDERREND REM Push 'N' button BMPVIEW %TEMP%\BMP\N1.BMP /XC /X=412 /Y=288 GOTO END :END OFF :ERROR ECHO RAMDIRVE NOT FOUND! PAUSE > NUL GOTO END :GO IF EXIST %TEMP%\BMP\WAIT.BMP BMPVIEW %TEMP%\BMP\WAIT.BMP IF NOT EXIST %TEMP%\BMP\WAIT.BMP ECHO COPYING... MICOPY A:\TOOLS %TEMP%\TOOLS > NUL MICOPY A:\DOS %TEMP%\DOS > NUL COPY COMMAND.COM %TEMP%\ > NUL COPY RUN.BAT %TEMP%\ > NUL %TEMP% CD \ SET COMSPEC=%TEMP%\COMMAND.COM SET BASECD= PATH=%TEMP%\TOOLS;%TEMP%\DOS RUN.BAT run.bat的内容： @ECHO OFF PATH=%TEMP%\TOOLS;%TEMP%\DOS :CHECKCD REM Check CD-ROM Drive REM  0:Ready 1:NotReady 2:NotCD-ROMdrive 3:IllegalDrive CDCHECK T: > NUL CDCHECK T: > NUL IF ERRORLEVEL 2 GOTO NO_CDDRV IF ERRORLEVEL 1 GOTO SET_CDROM SET CDDRV=T: GOTO CD_EXIST :SET_CDROM REM Insert CD-ROM BMPVIEW %TEMP%\BMP\SETCDROM.BMP PAUSE > NUL :CHECKCD2 REM Check CD-ROM Drive CDCHECK T: > NUL CDCHECK T: > NUL IF ERRORLEVEL 2 GOTO NO_CDDRV IF ERRORLEVEL 1 GOTO NOCDROM SET CDDRV=T: GOTO CD_EXIST :CD_EXIST REM Check Recovery CD-ROM IF NOT EXIST %CDDRV%\PREINST.GHO GOTO BAD_CDROM IF NOT EXIST %CDDRV%\GHOST.EXE GOTO BAD_CDROM IF NOT EXIST %TEMP%\TOOLS\GHOST.EXE COPY %CDDRV%\GHOST.EXE %TEMP%\TOOLS > NUL :RECOVERY IF NOT EXIST %CDDRV%\PREDATA.BAT GOTO BAD_CDROM IF (%COMPMODE%) == () CALL %CDDRV%\PREDATA.BAT IF NOT EXIST %TEMP%\BMP\CHANGE.BMP GOTO SKIP IF (%CDMAX%) == (1) GOTO SKIP BMPVIEW %TEMP%\BMP\CHANGE.BMP PAUSE > NUL :SKIP SET TGHOSTPS=%FILENAME% IF (%COMPMODE%) == (PARTITION) TGHOST -clone,mode=pload,src=%CDDRV%\PREINST.GHO:1,dst=1:1 -afile=%TEMP%\PREINST.ERR -fatlimit -auto -sure -batch %GOPT% IF (%COMPMODE%) == (DRIVE)     TGHOST -clone,mode=load,src=%CDDRV%\PREINST.GHO,dst=1,szeE -afile=%TEMP%\PREINST.ERR -fatlimit -auto -sure -batch %GOPT% IF ERRORLEVEL 1 GOTO REC_NG LBA /C > NUL FDISK /MBR > NUL :NORMAL REM Recovery success BMPVIEW %TEMP%\BMP\THEEND.BMP :LOOP PAUSE > NUL HARDBOOT GOTO LOOP REM ================= ERROR =============================== :BAD_CDROM REM Bad CD-ROM BMPVIEW %TEMP%\BMP\BADCDROM.BMP /X=140 /Y=160 CLK CHOICE > NUL IF ERRORLEVEL 2 GOTO CDERREND REM Push 'Y' button BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288 GOTO SET_CDROM :NOCDROM REM CD-ROM not found BMPVIEW %TEMP%\BMP\NOCDROM.BMP /X=140 /Y=160 CLK CHOICE > NUL IF ERRORLEVEL 2 GOTO CDERREND REM Push 'Y' button BMPVIEW %TEMP%\BMP\Y1.BMP /XC /X=340 /Y=288 GOTO SET_CDROM :NO_CDDRV REM CD-ROM Drive not found BMPVIEW %TEMP%\BMP\NO_CDDRV.BMP PAUSE > NUL GOTO END :REC_NG REM Recovery error BMPVIEW %TEMP%\BMP\RECOVERR.BMP /X=96 /Y=168 CLK CHOICE > NUL IF ERRORLEVEL 2 GOTO R_ERREND REM Push 'Y' button BMPVIEW %TEMP%\BMP\Y3.BMP /XC /X=392 /Y=272 REM Restart BMPVIEW %TEMP%\BMP\REBOOT2.BMP PAUSE > NUL REM check boot devie REM  0:FD 1:CD-ROM CDCKBOOT > NUL REM if errorlevel 1 then set boot priority "CD-ROM"=4 IF ERRORLEVEL 1 SETBOOT 4 >NUL REM reboot HARDBOOT :R_ERREND REM Push 'N' button BMPVIEW %TEMP%\BMP\N1.BMP /XC /X=464 /Y=272 GOTO END :CDERREND REM Push 'N' button BMPVIEW %TEMP%\BMP\N1.BMP /XC /X=412 /Y=288 GOTO END :END OFF 光盘内predata.bat的内容： @ECHO OFF REM --- Version 3.0(603) --- SET SWN=S3A0739D SET EXT=001 SET VOLLABEL=%SWN%%EXT% SET FILENAME=%SWN%.%EXT% SET COUNTRY=CHINA SET INSTMODE=SING SET COMPMODE=PARTITION SET OSTYPE=ME SET PASSMODE=YES SET CDMAX GHOST镜像文件有密码，如何破解？ 2010-8-7 15:30 fujianabc 金牌会员 积分 3467 发帖 1616 注册 2004-6-21 状态 离线 『第 2 楼』:   先恢复gho文件，然后自己用ghost重做一个gho文件就没密码了 2010-8-8 10:39

可打印版本 | 推荐给朋友 | 订阅主题 | 收藏主题

论坛跳转: 站务区  > 站务公告 & 版主讨论  > 意见反馈 & 网友交流 DOS讨论区  > DOS学习入门 & 精彩文章 （教学室）  > DOS疑难解答 & 问题讨论 （解答室）  > DOS启动盘 & LOGO技术 （启动盘室）  > DOS批处理 & 脚本技术（批处理室）  > DOS媒体世界 & 网络技术 （多媒体室）  > DOS汉化世界 & 中文系统 （中文化室）  > DOS开发编程 & 发展交流 （开发室）  > DOS软件下载 & 游戏分享 （下载室） 其它讨论区  > GRUB4DOS、SYSLINUX及其它启动管理软件讨论专区  > 其它操作系统综合讨论区  > WinPE、PowerShell及其它命令行系统专区  > 贴图灌水、文学娱乐专区 服务区  > 网络日志（Blog）  > 论坛回收站      > 链接失效，待修正