Board logo

标题: DOS下用指令找 Ethernet ID [打印本页]

作者: shengping     时间: 2008-12-18 10:39    标题: DOS下用指令找 Ethernet ID

請教各位,假如電腦裏面有藍牙,無線網卡,有線網卡.有沒有指令可以直接將有線網卡的ID抓出來.
例如, ipconfig /all 得到的資訊如下,我想把 00-1F-C6-45-2F-20 給抓出來.當然這個程式應該不僅僅針對這台電腦,對所有的電腦都應該能用.

我現在遇到的難題是機器有幾個ID且有關ID的那一行的關鍵字及格式都一樣,很難用find 指令達到目的.

Ethernet adapter 無線網路連線 3:
        Media State . . . . . . . . . . . : Media disconnected
        Description . . . . . . . . . . . : Intel(R) Wireless WiFi Link 4965AGN #2
        Physical Address. . . . . . . . . : 00-1D-E0-56-22-53
Ethernet adapter 區域連線 7:
        Description . . . . . . . . . . . : Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller
        Physical Address. . . . . . . . . : 00-1F-C6-45-2F-20
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 10.128.83.11
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 10.128.83.1
        DHCP Server . . . . . . . . . . . : 172.28.128.8
        DNS Servers . . . . . . . . . . . : 172.28.128.129
                                           172.28.128.128
        Primary WINS Server . . . . . . . : 172.28.128.129
        Secondary WINS Server . . . . . . : 172.28.128.128
        Lease Obtained. . . . . . . . . . : 2008年12月18日 上午 07:50:39
       Lease Expires . . . . . . . . . . : 2008年12月21日 上午 07:50:39
Ethernet adapter 區域連線 8:
   Media State . . . . . . . . . . . : Media disconnected
        Description . . . . . . . . . . . : Bluetooth Personal Area Network
        Physical Address. . . . . . . . . : 00-0E-A6-F3-56-9D
作者: shengping     时间: 2008-12-18 16:37
我想到一個思路:

雖然 Physical Address.等關鍵字及格式不是唯一的,但上一行中Atheros L1 Gigabit Ethernet 10/100/1000Base-T  的關鍵字是唯一的. 有沒有指令找到上一行後,可以把下一行給列印出來?

Description . . . . . . . . . . . : Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller
        Physical Address. . . . . . . . . : 00-1F-C6-45-2F-20
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
作者: xugaohui     时间: 2008-12-18 17:08
多看看批处理版块,这个问题很容易解决。我只会在那里找一些代码七拼八凑。