connerxxx
初级用户
积分 73
发帖 31
注册 2010-4-22
状态 离线
|
『楼 主』:
关于no packet driver的配置
经过这几天的研究，算是让ftp这个命令不再提示no packet driver了，这期间想了很久，我把配置拿上来大家参考下，也帮我看看和大家有什么不同的。
me的VMware装的是MSdos7.1的，安装了MSClient。以下是四个配置文件：
config.sys:
[menu]
menuitem=nomal,nomal configuration
menuitem=MSClient,msclient
menudefault=nomal,3
menucolor=15,0
[nomal]
DEVICEHIGH=C:\DOS71\POWER.EXE
DEVICEHIGH=C:\DOS71\DISPLAY.SYS CON=(,,1)
[msclient]
device=C:\NET\ifshlp.sys
devicehigh=c:\net\protman.dos /i:c:\net
devicehigh=c:\net\dis_pkt.dos
devicehigh=c:\net\pcntnd.dos
devicehigh=c:\net\nemm.dos
devicehigh=c:\net\tcpdrv.dos
[common]
DEVICE=C:\DOS71\ECHO.SYS W/e/l/c/o/m/e /t/o MS-DOS 7.10...
DEVICE=C:\DOS71\ECHO.SYS C/o/p/y/r/i/g/h/t M/i/c/r/o/s/o/f/t C/o/r/p. A/l/l /r/i/g/h/t/s /r/e/s/e/r/v/e/d.
DEVICE=C:\DOS71\HIMEM.SYS/testmem:off
DEVICE=C:\DOS71\EMM386.EXE noems novcpi
DEVICEHIGH=C:\DOS71\SETVER.EXE
REM DEVICEHIGH=C:\DOS71\POWER.EXE
DEVICEHIGH=C:\DOS71\VIDE-CDD.SYS /D:IDE-CD
REM DEVICEHIGH=C:\DOS71\DISPLAY.SYS CON=(,,1)
COUNTRY=001,437,C:\DOS71\COUNTRY.SYS
SHELL=COMMAND.COM /P /E:640
DOS=HIGH,UMB,AUTO
FCBS=4,0
FILES=30
BUFFERS=15,0
LASTDRIVE=J
STACKS=9,256
SET PATH=C:\DOS71;..;C:\MASM5.0;.\net
autoexec.bat:
@ECHO OFF
PROMPT $P$G
SET DIRCMD=/4
MODE CON RATE=32 DELAY=1
REM MODE CON CP PREPARE=((437)EGA.CPI)
REM MODE CON CP SELECT=437
REM KEYB US,,KEYBOARD.SYS
LH KILLER
LH DOSKEY
LH DOSLFN /Z:C:\DOS71\CP437UNI.TBL
LH SHARE /L:30
REM LH NLSFUNC
LH SMARTDRV
REM LH CTMOUSE
REM For compatiblity purpose:
LH CTMOUSE > NUL
ECHO.
REM For locking volumes to enable "direct disk access":
CALL LOCKDRV.BAT
BREAK ON
LFNFOR ON
ECHO Now you are in MS-DOS 7.10 prompt. Type 'HELP' for help.
ECHO.
SET CTSYN=C:\SOUND
SET MIDI=SYNTH:1 MAP:E MODE:0
SET BLASTER=A220 I5 D1 H5 P330 E620 T6
PATH=C:\NET;C:\DOS71;..;;C:\DOS71\norton
goto %config%
:nomal
LH MSCDEX /D:IDE-CD
goto end
:msclient
C:\NET\net initialize
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
goto end
:end
protocol.ini:
[network.setup]
version=0x3110
netcard=amd$pcntnd,1,AMD$PCNTND,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,MS$NETBEUI
transport=tcpip,TCPIP
lana0=amd$pcntnd,1,ms$netbeui
lana1=amd$pcntnd,1,ms$ndishlp
lana2=amd$pcntnd,1,tcpip
[TCPIP]
DefaultGateway0=192 168 171 2
NBSessions=6
SubNetMask0=255 255 255 0
IPAddress0=192 168 1 2
DisableDHCP=1
DriverName=TCPIP$
BINDINGS=AMD$PCNTND
LANABASE=1
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[pktdrv]
drivername=pktdrv$
bindings=amd$pcntnd
intvec=0x60
chainvec=0x66
[AMD$PCNTND]
DriverName=PCNTND$
maxmulticasts=10
txbuffers=4
rxbuffers=4
;medium=_100full
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=AMD$PCNTND
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=AMD$PCNTND
LANABASE=0
system.ini:
[network]
sizworkbuf=1498
filesharing=no
printsharing=no
autologon=yes
computername=DOS USER C
lanroot=C:\NET
username=DOS USER
workgroup=MSHOME
reconnect=yes
dospophotkey=N
lmlogon=0
logondomain=WORKGROUP
preferredredir=full
autostart=full
maxconnections=8
[network drivers]
netcard=pcntnd.dos
transport=tcpdrv.dos,nemm.dos,ndishlp.sys
devdir=C:\NET
LoadRMDrivers=yes
[386enh]
TimerCriticalSection=5000
UniqueDosPSP=TRUE
PSPIncrement=2
[Password Lists]
*Shares=C:\NET\Shares.PWL
现在ftp运行不再提示no packet driver这个头大的提示了，只是连接上互联网还不太会，有知道的告诉一下！
[ Last edited by connerxxx on 2010-4-29 at 19:52 ]
|
 |
|
