标题: 如何在98启动软盘里 加载SATA光驱？ [打印本页]
作者: aliu 时间: 2007-3-26 02:02 标题: 如何在98启动软盘里 加载SATA光驱？
求助如何在98启动软盘里 加载SATA光驱？
希望可以在98启动软盘了里可以加入STAT光驱的驱动，引导SATA光驱启动，读取光盘上的文件和程序。
[ Last edited by aliu on 2007-3-25 at 01:04 PM ]
作者: lianjiang2004 时间: 2007-3-26 02:09
加gcdrom
作者: bc12060101 时间: 2007-3-26 02:09
嘿嘿，加入SATA光驱驱动（还得改写一下CONFIG.SYS文件）
应该是gcdrom.sys吧。
作者: aliu 时间: 2007-3-26 04:21
能否详细的说明在98启动盘内CONFIG.SYS该如何改写？
万分感谢
作者: barton 时间: 2007-3-28 23:48
[menu]
menuitem=IDE_CDROM, Start computer with IDE/ATAPI CD-ROM support.
menuitem=OAK_CDROM, Start computer with other IDE/ATAPI CD-ROM support.
menuitem=USB_CDROM, Start computer with USB CD-ROM support.
menuitem=SATA_CDROM, Start computer with SATA CD-ROM support.
menudefault=IDE_CDROM,30
menucolor=7,0
[IDE_CDROM]
devicehigh=himem.sys /testmem:off
device=IDECD.sys /D:idecd001
devicehigh=ramdrive.sys /E 4096
[OAK_CDROM]
devicehigh=himem.sys /testmem:off
device=oakcdrom.sys /D:idecd001
devicehigh=ramdrive.sys /E 4096
[USB_CDROM]
devicehigh=himem.sys /testmem:off
devicehigh=usb\ramfd.sys
devicehigh=usb\usbaspi.sys
devicehigh=usb\di1000dd.sys
devicehigh=usb\usbcd.sys /d:USB-CD
devicehigh=Usbmass.exe
devicehigh=ramdrive.sys /E 4096
[SATA_CDROM]
devicehigh=himem.sys /testmem:off
DEVICE=GCDROM.SYS /D:MSCD000 /C0
DEVICE=GCDROM.SYS /D:MSCD001 /C1
DEVICE=GCDROM.SYS /D:MSCD002 /C2
devicehigh=ramdrive.sys /E 4096
[COMMON]
files=20
buffers=30
dos=high,umb
stacks=9,256
lastdrive=z
SWITCHES=/N /F
menuitem=IDE_CDROM, Start computer with IDE/ATAPI CD-ROM support.
menuitem=OAK_CDROM, Start computer with other IDE/ATAPI CD-ROM support.
menuitem=USB_CDROM, Start computer with USB CD-ROM support.
menuitem=SATA_CDROM, Start computer with SATA CD-ROM support.
menudefault=IDE_CDROM,30
menucolor=7,0
[IDE_CDROM]
devicehigh=himem.sys /testmem:off
device=IDECD.sys /D:idecd001
devicehigh=ramdrive.sys /E 4096
[OAK_CDROM]
devicehigh=himem.sys /testmem:off
device=oakcdrom.sys /D:idecd001
devicehigh=ramdrive.sys /E 4096
[USB_CDROM]
devicehigh=himem.sys /testmem:off
devicehigh=usb\ramfd.sys
devicehigh=usb\usbaspi.sys
devicehigh=usb\di1000dd.sys
devicehigh=usb\usbcd.sys /d:USB-CD
devicehigh=Usbmass.exe
devicehigh=ramdrive.sys /E 4096
[SATA_CDROM]
devicehigh=himem.sys /testmem:off
DEVICE=GCDROM.SYS /D:MSCD000 /C0
DEVICE=GCDROM.SYS /D:MSCD001 /C1
DEVICE=GCDROM.SYS /D:MSCD002 /C2
devicehigh=ramdrive.sys /E 4096
[COMMON]
files=20
buffers=30
dos=high,umb
stacks=9,256
lastdrive=z
SWITCHES=/N /F